D-Link DSR-1000 - Chapter 6. Utility Commands Used in CLI; Util Ping <Ip_Address; Util System_Check Capturepackets; Util System_Check

Unified Services Router CLI Reference Guide
15
Chapter 6. Utility commands used in
CLI
The command util ? at the CLI prompt would give the description of all the utility commands in
the branch util, which is as follows:
Sl No
Command Name
Purpose
1
util ping
Ping or Trace an IP Address.
2
util restore_factory_defaults
Revert to factory default settings.
3
util reboot
Reboot the system
6.1 util ping <ip_address>
Sl No
Command Name
Description
Type and Description
1
ip_address
Ping target IP address.
IP Address,
Ping target IP address.
6.2 util system_check capturePackets
Sl No
Command Name
Description
Type and Description
1
download
Download the packet capture to the
host machine
Download the packet capture to the
host machine
2
Start
Start the packet capture
Specify the interface (WAN1,
WAN2 and LAN)
3
Stop
Stop the packet capture
6.3 util system_check
Sl No
Command Name
Description
Type and Description
1
display_IPV4_routingtable
Display IPV4 Routing Table
Display IPV4 Routing Table
6.4 util system_check dns_lookup
Sl No
Command Name
Description
Type and Description
1
dns
Internet name
String
IP address
DNS
6.5 util system_check traceroute
Sl No
Command Name
Description
Type and Description
1
ip_address
It displays all the routers present
String