EasyManua.ls Logo

D-Link DSR-1000 - Net Wan Configurable_Port Configure; Net Wan Wan1 Ipv4 Configure

D-Link DSR-1000
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unified Services Router CLI Reference Guide
34
8.31 net wan configurable_port configure
Command Name
Description
Type and Description
port_name
Select the configurable port type
Select from the wan2 or dmz
8.32 net wan wan1 ipv4 configure
Command Name
Description
Type and Description
dhcpc mac_address
This command allows you to set the
MAC address.
MAC Address,
Its format is XX:XX:XX:XX:XX:XX
where X is a number from 0 to 9
(inclusive) or an alphabetical letter
between A and F (inclusive).
dhcpc mac_type
The default is set to Use Default
Address. If your ISP requires MAC
authentication and another MAC
address has been previously registered
with your ISP, then select either Use
this computer's MAC address or select
Use This MAC Address and manually
enter in the MAC address expected by
your ISP.
Types of mac address source,
Use-Default-Mac/Use-This-
Computers-Mac/Use-This-Mac
dhcpc hostname
Set hostname
String,setting Dhcp hostname
dhcpc
get_dns_from_isp
Enter Yes to get dns dynamically from
ISP otherwise Enter No and give valid
static dns addresses
Boolean Choice (Y/N),
Enter Yes to get dns dynamically
from ISP otherwise Enter No and
give valid static dns addresses
dhcpc
primary_dns
Valid primary DNS Server IP Address
IP Address,
Primary dns
dhcpc
secondary_dns
Valid secondary DNS Server IP
Address
IP address,
Secondary dns
Isp
require_login
Select this option if your connection
type is one of PPPoE, PPTP or L2TP
Boolean Choice (Y/N),
Set Y if your connection type is
once of PPPoE, PPTP or L2TP
otherwise N.
isp_connection_type
Select among the options: STATIC,
DHCPC, PPPoE, PPTP, or L2TP
ISP Types.
STATIC/DHCPC/PPPOE/PPTP/L2
TP
l2tp connectivity_type
Set connectivity type
ISP Connectivity Types.
keepalive/idletimeout
l2tp idle_time
Set idle timeout value
idle timeout value type. Valid range
is 5 to 999
l2tp my_address
IP address assigned by the ISP to
make a connection with the ISP server
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
l2tp password
Enter the password to log in.
String, Alphanumeric password
l2tp secret
Enter the secret phrase to log into the
server
String,
Alphanumeric server secret phrase
l2tp server_address
IP address of the L2TP server
IP address AAA.BBB.CCC.DDD

Table of Contents

Other manuals for D-Link DSR-1000

Related product manuals