D-Link DSR-1000 - Net Routing Protocol_Binding Add;Edit; Routing Protocol_Binding Enable <Row_Id

Unified Services Router CLI Reference Guide
43
Sl No
Command Name
Description
Type and Description
13
pppoe primary_dns
Valid primary DNS Server IP Address
IP Address,
Primary dns
14
pppoe secondary_dns
Valid secondary DNS Server IP
Address
IP address,
Secondary dns
15
Cancel
Roll back wan configuration changes
16
Exit
Save wan configuration changes and
exit current mode
11
Save
Save wan configuration changes
8.43 net routing protocol_binding add/edit
Sl No
Command Name
Description
Type and Description
1
destination_address_end
Ending IP of the Destination user
String
2
destination_address_start
Start IP of the Destination user
String
3
Destination_Network
Destination network type
ANY
SINGLE_ADDRESS
ADDRESS_RANGE
4
Local_Gateway
Local gateway type
Type:
Dedicated WAN
Configurable WAN
5
Service
Available Service
Default service types
6
source_address_end
Ending IP of the Source user
String
IP address
8
source_address_start
Starting IP of the Source Network
String
IP address
9
Source_Network
Source network type
ANY
SINGLE_ADDRESS
ADDRESS_RANGE
10
cancel .
Roll back configuration changes.
11
Save
Save Protocol-Binding rules
configuration changes
12
show
Display system components'
configuration
13
Exit
Save routing protocol binding
configuration and exit current mode
8.44 routing protocol_binding enable <row_id>
Sl No
Command Name
Description
Type and Description
1
row_id
Row Id Of the rule to be enabled
Unsigned integer