D-Link DSR-1000 - Net Routing Static Ipv4 Delete <Name; Net Routing Static Ipv6 Configure <Name

Unified Services Router CLI Reference Guide
31
Sl No
Command Name
Description
Type and Description
5
interface
Set interface for which the route is
applied
String,
Valid strings (LAN/WAN)
6
metric
Set the metric for this route
Integer value,
Valid metric 2-15
7
private_flag
Defines whether the route can be
shared with other gateways when RIP
is enabled
Boolean Choice (Y/N),
Set/unset the private flag
8
subnet_mask
Set the subnet for this rule.
IP address,
Subnet mask
9
cancel
Roll back route configuration changes.
10
exit
Save static routes changes and exit
current mode.
11
save
Save static route changes.
8.26 net routing static ipv4 delete <name>
Sl No
Command Name
Description
Type and Description
1
name
Unique route name
String,
Route name
8.27 net routing static ipv6 configure <name>
Sl No
Command Name
Description
Type and Description
1
name
Unique route name
String,
Route name
2
active_flag
Defines whether its an active route
Boolean choice (Y/N),
Set/unset the active flag
3
destination_address
Set the destination IP.
IP Address,
Destination address
4
gateway_address
Set the gateway ip address
IP Address,
Gateway address
5
interface
Set interface for which the route is
applied
Interface type,
Dedicated-WAN/LAN/6to4-WAN
6
metric
Set the metric for this route
Integer value,
Valid metric 2-15
7
prefix
Set the prefix length for this rule.
Integer,
Prefix length
8
cancel
Roll back route configuration changes.
9
exit
Save static routes changes and exit
current mode.
10
save
Save static route changes.