D-Link DSR-1000 - Chapter 9. Configuration Commands under Branch SECURITY; Security Attack_Checks Configure; Security Blocked_Keywords Add;Edit

Unified Services Router CLI Reference Guide
45
Chapter 9. Configuration commands
under branch SECURITY
9.1 security attack_checks configure
Sl No
Command Name
Description
Type and Description
1
echostorm_flood_rate
<echostorm>
Configure the Echo Storm Flood Rate
Integer
Configure Echo Storm Flood Rate
(Value between 1-10000)
2
icmp_flood_rate <icmpflood>
Configure the ICMP flood Rate
Integer
Configure ICMP Flood Rate (Value
between 1-10000)
3
synflood_dectect_rate
<synflood>
Configure the Syn flood Detect Rate
Integer
Configure Syn Flood Detect Rate
(Value between 1-10000)
4
respond_to_ping_enable
<respondToPing>
Enable or Disable Respond To Ping on
Internet Ports.
Enable / Disable Respond to Ping
(Y/N)
5
stealth_mode_enable
<stealthMode>
Enable or Disable Stealth Mode.
Enable / Disable Stealth Mode
(Y/N)
6
tcp_block_enable <tcpBlock>
Enable or Disable TCP Flood on WAN
port.
Enable / Disable TCP Flood on
WAN (Y/N)
7
udp_block_enable
<udpBlock>
Enable or Disable UDP Flood on LAN
port.
Enable / Disable UDP Flood on
LAN (Y/N)
8
cancel
Roll back Security Checks
configuration changes.
9
exit
Save Security Checks configuration
changes and exit current mode.
10
save
Save Security Checks configuration
changes.
9.2 security blocked_keywords add/edit
Sl No
Command Name
Description
Type and Description
1
group_name <group>
Keyword Blocking is applied to group
name mentioned
String
Group name
2
keyword <keyword>
Configure keyword to be blocked
String
Keyword used for blocking traffic
3
cancel
Roll back blocked keywords
configuration changes.
4
exit
Save blocked keywords configuration
changes and exit current mode.
5
save
Save blocked keywords configuration
changes.