On this page, you can configure basic match pattern of outbound routes and create
different dial plan. Please configure by clicking【Add a Dial Rule】
Item Explanation
Rule Name Set a name for this dial rule
PIN Set
Set PIN which you need input when you dial out by this rule.
Place this call through Choose a trunk for this rule
Failover
Choose a failover trunk for using when the above chosen
trunk is not available.
Dialing Rules Define the number match pattern for dialing.
Define a custom pattern
N digit from 2 to 9
Z digit from 1 to 9
X digit from 0 to 9
. One digit or multi digits
Delete[ ]digits prefix
If deleted one digit prefix, when dial 12345, digit 2345 will be
sent.
Auto-add digit[ ] If added digit"1", when dial 12345, digit 123451 will be sent.
To Next Page
Loading...
