Need help?Do you have a question about the D-Link DVX-2004 and is the answer not in the manual?
General| Model | DVX-2004 |
|---|---|
| Type | IP PBX |
| FXS Ports | 4 |
| Humidity | 10% to 90% non-condensing |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols Supported | SIP |
| Voice Codecs | G.711, G.729 |
| Fax Support | T.38 |
| Operating Temperature | 0°C to 40°C |
Guides users on obtaining the IP address and logging into the DVX-2004 IP PBX system via web browser.
Explains how to configure SIP/IAX2 and analog extensions, including user details and settings.
Details how to configure outbound calls, starting with trunk setup.
Explains how to add and configure different types of trunks (Analog/GSM, VoIP, Peer) for outbound calls.
Guides on creating and configuring a VoIP trunk for outbound calls using specific protocols.
Describes setting up a 'Peer' trunk for outbound calls to another DVX-2004 IP PBX.
Defines which trunk is used for outbound calls by extension users, configuring match patterns.
Introduces inbound call routing to extensions or IVR systems.
Configures how inbound calls from trunks are directed to extensions, call queues, or IVRs.
Explains how to transfer calls to other extensions, either blindly or attended.
Details how to set up voicemail, record messages, and receive them via email.
Introduces setting up call queues and managing agents for efficient call distribution.
Details voicemail reference, message options, playback settings, and email notifications.
Defines custom codes for call parking, transfer, blacklist, conference, and call queue functions.
Configures WAN/LAN IP addresses, hostname, DNS, and tone zone settings.
Manages user accounts, passwords, and IP access permits for the system.
Guides on updating firmware, IVR prompts, and backup files using TFTP.
To Next Page
