Item Explanation
Peer Name Define the Peer Name, digit or letter is allowed.
Protocol Choose protocol for this trunk, SIP or IAX2
Dial Plan
Choose a dial plan for this trunk, define it in the submenu named
【Outbound Routes】.
Host IP Address of the other DVX-2004 IP PBX
NAT
Check this option, extension user will be configured after NAT
(Network Address Translation).
Without
Authentication
If you don't use Authentication when connecting server, pls check
this option.
Username Username provided by the other DVX-2004 IP PBX.
Password Password provided by the other DVX-2004 IP PBX.
Once A trunk is added, this trunk will be displayed in the "List of Trunk". You can define the
codecs, configure advanced settings or delete this trunk from the drop downs of "Option"
3.3.4 Outbound Routes
Outbound Routes is to define what trunk is used for outbound call by extension user. If
you don't allow extension user call out, please ignore this part.
Please configure on this page: 【Basic】->【Outbound Routes】
To Next Page
Loading...
Need help?
General
