Click【DISA】---【New DISA】to display the diagram as below:
Item Explanation
Name Give this DISA a brief name to help you identify it.
PIN The user will be prompted for this number
Response Timeout(s)
The maximum amount of time it will wait before
hanging up if the user has dialed an incomplete or
invalid number. Default is10 seconds.
Digit Timeout(s)
The maximum amount of time permitted between
digits when the user is typing in an extension. Default
is 5 seconds.
Extension for this DISA
(Optional)
If you want this DISA to be accessible by dialing an
extension, you can define an extension number for
this DISA.
Select DialPlan Set the DialPlan that calls will originate from.
4.5 Paging And Intercom
Paging And Intercom is used for calling a paging extension, all terminals which support
this function will be picked up automatically and listen, meanwhile, it supports duplex.
Click【Paging And Intercom】---【Add Paging Group】to display the diagram as below:
To Next Page
Loading...
Need help?
General
