D-Link DWA-121 - Windows 7;Vista Users

57D-Link DWA-121 User Manual
Appendix B - Networking Basics
Windows 7/Vista
®
Users
• ClickonStart > Control Panel (make sure you are in Classic View). Double-click on the Network and Sharing Center icon. If you are using
Windows Vista, click on Manage network connections along the left panel in the window. For Windows 7, click on Change adapter settings.
• Right-clickontheWireless Network Connection which represents your D-Link wireless network adapter.
• HighlightInternet Protocol Version 4 (TCP /IPv4) and click Properties.
• ClickUse the following IP address and enter an IP address that is on the same
subnet as your network or LAN IP address on your router or network.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network.
• SetDefault Gateway the same as the LAN IP address of your router or gateway.
• SetPrimary DNS the same as the LAN IP address of your router or gateway.
• TheSecondary DNS is optional (you may enter a DNS server from your ISP).
• ClickOK to save your settings.