32D-Link DWA-160 User Manual
Section 4 - Wireless Security
Configure WPA
™
/WPA2
™
-Personal
Using the D-Link Wireless Connection Manager
It is recommended to enable WPA/WPA2-Personal on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WPA/WPA2-Personal passphrase being used.
1. Open the Wireless Connection Manager by double-clicking on the D-Link
icon on your desktop.
2. Highlight the wireless network (SSID) you would like to connect to and click
Connect. If the network is using WPA/WPA2-Personal, the screen (as shown
to the bottom-right) will appear.
3. Enter the WPA/WPA2-Personal passphrase exactly as it is on your wireless
router or access point. Click the Show text in the password field box to see
the passphrase. Unchecking it will hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to connect.
If you would like to create a new network and enter the WPA/WPA2-Personal settings,
refer to the next page.
To Next Page
Loading...
