D-Link DWA-160 - Installation; Getting Started; Remove Existing Installations

7D-Link DWA-160 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager
before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software
is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
s2EMOVEANYPREVIOUSINSTALLATIONSOFWIRELESSADAPTERS
s$ISABLEANYBUILTINWIRELESSADAPTERS
s6ERIFYTHESETTINGSSUCHASTHE33)$ANDSECURITYSETTINGSOFTHENETWORKSYOUWANTTOCONNECTTO
Remove Existing Installations
)FYOUVEINSTALLEDADIFFERENTMANUFACTURESADAPTERORADIFFERENTMODEL$,INKADAPTERMAKESURETHESOFTWAREISUNINSTALLEDBEFORE
installing the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different
times, make sure the utilities are not set to load when your computer boots up. Windows
®
XP and Vista users may use the built-in
wireless utility for all adapters.
To remove any old software:
Windows
®
XP/Vista
™
users: Click Start > Control Panel > Add or Remove Programs.
Windows
®
2000 users: Click Start > Settings > Control Panel > Add or Remove Programs.