43D-Link DWA-160 User Manual
Section 5 - Troubleshooting
Check that the Network Connection for the wireless client is configured properly. Select AP (Infrastructure) when connecting to
an access point. Double-click on the WLAN icon in the taskbar > click on Configuration to change the settings for the wireless
adapter.
If Security is enabled, make sure that the correct encryption keys are entered on both the DWA-160 and the access point. Double-
click on the WLAN icon in the taskbar > click Encryption. Check to see that the key selected is set to the same key as other devices
on the network.
To Next Page
Loading...
