2
3
4
Select the language you want the setup wizard to display. Click Next to continue.
The Welcome screen will appear. Click Next to continue.
You will now be asked to plug the DWA-182 adapter into an available USB
port. Once you plug it in, click Install to continue.
WARNING: Do NOT plug the adapter into your computer before installing
the drivers. You will be prompted to plug in your adapter during the setup.
Installation - Windows
®
10
1
Insert the DWA-182 Driver CD into the CD drive. When the autorun screen
appears, click Install and follow the on-screen instructions.
Installation - Windows
®
Note: If the CD Autorun function does not automatically start on your computer, press
the Windows Key + “R”. In the run box type “D:\autorun.exe” (where D: represents
the drive letter of your CD drive) and click OK.
If your computer does not have a CD drive, download the DWA-182 driver
software by visiting http://support.dlink.com/DWA-182 (USA) or
http://support.dlink.ca/DWA-182 (Canada). Click the Downloads tab and select your
hardware revision in the drop down eld.
3
To Next Page
Loading...
