D-Link DWA-182 - Introduction to the DWA-182

WARNING: Do NOT plug the adapter into your computer before installing
the drivers. You will be prompted to plug in your adapter during the setup.
Installation - macOS
Open the disc drive (CD icon) that should appear on your desktop.
Navigate to the Mac OS Drivers folder and install the driver that corresponds
to your MacBook's software version. If you are not sure, go to the Apple icon
on the top left of your toolbar and click About this Mac and then More Info.
Run Installer.pkg and follow the instructions.
Note: Insert the CD before connecting the DWA-182 to your Mac.
1
2
3
The drivers will now be installed. This process may take a minute to complete.
Once the InstallShield Wizard Complete screen appears, the DWA-182 has
been successfully installed. Click Finish to exit the Install Wizard.
Click on the Wi-Fi Connection icon in the bottom right corner of the screen.
Select the wireless network you want to connect to. Please enter the password
for your wireless network if prompted. You are now connected to your wireless
network. If your Wi-Fi router supports WPS (Wi-Fi Protected Setup), you can
use the WPS button on your adapter to automatically congure and connect
to your wireless network. See the “Using WPS to Connect to Your Wireless
Network” for more details.
5
6
7
4