D-Link DWA-182 User Manual

19D-Link DWA-182 User Manual
Section 3 - Conguration
Wi-Fi
®
Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) System is designed for easy setup of
security-enabled Wi-Fi networks. It is recommended to have the access
point or wireless router nearby during setup.
'PSNPSFJOGPSNBUJPOPO814WJTJU UIF8J'J"MMJBODFXFCTJUFBU
www.wi-.org.
“Push Button Conguration” (PBC) is a virtual button in the utility
that connects you to other WPS-enabled devices. A connection can be
FTUBCMJTIFECZDMJDLJOHPOUIFWJSUVBMCVUUPOUIFOQVTIJOHUIFQIZTJDBM
button on the access point or wireless router within 120 seconds. Refer
to page 14.
Note: You may also use the physical button on the DWA-182 instead of
using the D-Link software. Refer to the next page.
“Personal Identication Number” (PIN) is a unique number generated
SBOEPNMZCZUIFXJSFMFTTBEBQUFSTVUJMJUZ&OUFSJOHUIJTOVNCFSJOUIF
utility of the WPS-enabled wireless router or access point connects
you with the intended wireless network. Refer to page 22 for more
information.

D-Link DWA-182 Specifications

Power

current consumption (Tx)	495 mA
current consumption (Rx)	220 mA
operating voltage	5.0 VDC +/- 10%

Operating Environment

operating temperature	32°F to 104°F (0°C to 40°C)
operating humidity	10% to 90% maximum (non-condensing)

Weight and Dimensions

dimensions	3.8 x 1.1 x 0.5 inches (97.3 x 29.1 x 13.5 mm)
weight	21.94 grams