D-Link DWR-555 - MAC Address Filter

43D-Link DWR-555 User Manual
Section 3 - Configuration
MAC Address Filter
MAC FILTERING SETTINGS
Select this box to enable Mac Filtering.
Wireless and wired clients with C selected
can connect to this device and allow/
deny connections from unspecied MAC
addresses.
Wireless clients with A selected can
associate to the wireless LAN; and allow/
deny connections from unspecied MAC
addresses.
MAC FILTERING RULES
Identies the rule.
Specify the MAC Address of the computer
to be ltered.
Specify the last section of the IP address.
Click Trigger to congure Wake On LAN.
If this box is selected, the rule will follow the connection control setting specied in MAC ltering settings.
If this box is selected, the rule will follow the connection control setting specied in MAC ltering settings.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
MAC Address Control:
Connection Control:
Association Control:
ID:
MAC Address:
IP Address:
Wake On LAN:
C:
A:
The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC Address of the network
adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be congured to ALLOW
or DENY network/Internet access.