D-Link DWR-555 - Inbound Filter

46D-Link DWR-555 User Manual
Section 3 - Configuration
INTBOUND FILTER SETTING
Select this box to Enable the lter.
You may select Always On or
choose the number of a schedule
rule that you have dened.
Copies the predened lter to the
specied ID
INBOUND FILTER RULES LIST
Identies the lter.
Specify the local IP address and then
specify the port after the colon.
Specify the remote IP address and
then the port after the colon.
Select this box to enable the lter.
Specify the schedule rule number.
Go back to the previous lter page.
Advance to the next lter page.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
Inbound Filter
Inbound Filter:
Use Schedule Rule:
Copy to ID:
ID:
Source IP : Ports:
Destination IP : Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Inbound Filter enables you to control what packets are allowed to pass the router. Inbound lter only applies to packets that are destined
for Virtual Servers or DMZ hosts.