D-Link DWR-712 - Configuration; Web-based Configuration Utility

8D-Link DWR-712 User Manual
Section 3 - Conguration
Conguration
This section will show you how to congure your new D-Link mobile router using the web-based conguration utility.
Web-based Conguration Utility
To access the conguration utility, open a web-browser such as Internet Explorer and enter
the IP address of the router (192.168.0.1 by default).
To log in to the conguration utility, enter admin as the username, and then enter the password.
By default, the password is blank.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section
for assistance.
The conguration utility will open to the STATUS > DEVICE INFO page. You can view dierent
conguration pages by clicking on the categories at the top of the screen (SETUP/ADVANCED/
TOOLS/STATUS/SUPPORT), and then selecting a conguration page from the bar on the left side.
The following pages will describe each section in detail, starting with the SETUP pages.