D-Link DWR-712

52D-Link DWR-712 User Manual
Section 3 - Conguration
Firmware
Displays your current rmware’s version.
Displays your current rmware’s release date.
After you have downloaded a new rmware, click Browse to
locate the rmware on your computer, then click Upload to
start the rmware upgrade.
Warning: You must use a wired computer to upload the
rmware le; do not use a wireless computer. During
the upgrade process, do not power o your computer
or router, and do not refresh the browser window
until the upgrade is complete.
If the rmware you want to install is not an ocial D-Link
release, you will need to check this checkbox.
Warning: Unocial rmwares are not supported, and may
cause damage to your device. Use of unofficial
rmwares is at your own risk.
Here, you can upgrade the firmware of your router. Make sure the firmware you want to use is on the local hard drive of the
computer and then click Browse to upload the file. You can check for and download firmware updates at the D-Link support site at
http://support.dlink.com. After modifying any settings, click Save Settings to save your changes.
Current Firmware
Version:
Current Firmware Date:
Upload:
Accept Unocial
Firmware: