D-Link DWR-712

38D-Link DWR-712 User Manual
Section 3 - Conguration
MAC Address Filter
MAC FILTERING SETTINGS
Tick this box to enable MAC Filtering.
Wireless and wired clients with C selected can connect to this
device and allow/deny connections from unspecied MAC
addresses.
Wireless clients with A selected can associate to the wireless
LAN and allow/deny connections from unspecied MAC
addresses.
MAC FILTERING RULES
This identies the rule.
Specify the MAC Address of the computer to be ltered.
Specify the last section of the IP address.
Click Trigger to congure Wake On LAN.
If this box is ticked, the rule will follow the connection control
setting specied in MAC ltering settings specied above.
If this box is ticked, the rule will follow the association control
setting specied in MAC ltering settings specied above.
MAC Address Control:
Connection Control:
Association Control:
ID:
MAC Address:
IP Address:
Wake On LAN:
C:
A:
The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC Address of the network adapter.
A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be congured to ALLOW or DENY network/
Internet access. After modifying any settings, click Save Settings to save your changes.