D-Link DWR-712

19D-Link DWR-712 User Manual
Section 3 - Conguration
Choose whether the DIR-712 should only use 3G networks, 2G
networks, or use Auto Mode to automatically select a network.
Fill in a name to identify the following 3G conguration.
(Optional) Fill in only if requested by ISP.
(Optional) Fill in only if requested by ISP.
Enter the number to be dialed.
Select PAP, CHAP, or Auto detection. The default authentication
method is Auto.
(Optional) Enter the APN information.
Enter the PIN associated with your SIM card.
Select Auto or Manual to decide whether the routher should
reconnect to your 3G network automatically or manually.
Set the maximum time your connection can be idle before
disconnecting. Set it to 0 or choose Auto in Reconnect Mode
to disable this feature.
(Optional) Fill in if provided by your ISP. If not, keep the default
value.
Prefer Service Type:
Account/Prole Name:
Username:
Password:
Dialed Number:
Authentication:
APN:
PIN:
Reconnect Mode:
Maximum Idle Time:
Primary DNS Server:
3G
Choose this Internet connection if you already use a SIM card for 3G Internet service from your Telecom company. The elds here may not be
necessary for your connection. The information on this page should only be used if required by your service provider. After modifying any settings,
click Save Settings to save your changes.