72D-Link DWR-920 User Manual
Section 4 - Connecting to a Wireless Network
Using Windows Vista™
Windows
®
Vista
™
users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000, please refer to the user
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
®
Vista
™
utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center of the bubble
to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right corner next to
the time). Select Connect to a network.
The utility will display any available wireless networks in your area. Click on a network
(displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings for your
wireless adapter. Refer to Networking Basics on page 78 for more information.
dlink_DWR-920_xxxx
To Next Page
