D-Link DWR-920 - Internet Settings

21D-Link DWR-920 User Manual
Section 3 - Conguration
Internet Settings
On this page you can congure your Ethernet connection. This would be used if you have an Internet connection from a DSL, Cable, or other external
source. Note that by default, the 4G connection is used as your primary connection. If you are not sure which settings to use, please contact your
Internet Service Provider (ISP).
WAN Mode
Choose this to utilize and congure
WAN Settings.
Choose this to utilize 3G/4G.
Ethernet Type
WAN Mode
LAN Mode
Select an Internet connection type for your Ethernet WAN. This information should be provided by your ISP.
If you have chosen Dynamic IP, see WAN Connection Type - DHCP (Auto Cong) on page 22.
If you have chosen Static IP, see WAN Connection Type - Static IP Address Connection on page 22.
If you have chosen PPPoE, see WAN Connection Type - PPPoE (ADSL) on page 23.