To Next PageTo Next Page
Need help?Do you have a question about the D-Link DWR-M960 and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz |
|---|---|
| LAN Ports | 4 x 10/100 Mbps |
| WAN Ports | 1 x 10/100 Mbps |
| SIM Card Slot | Yes |
| Antenna Type | External |
| Wireless Speed | Up to 300 Mbps |
| Cellular Connectivity | 4G LTE |
| USB Port | 1 x USB 2.0 |
| Weight | 500 g |
| Wireless Standard | 802.11b/g/n |
| Security | WPA/WPA2 |
Provides a description of the DWR-M960 Wireless Broadband Router's capabilities.
Lists the key features of the DWR-M960, including wireless, wired, and mobile network capabilities.
Details the technical specifications of the DWR-M960 router, including hardware and wireless interfaces.
Describes the physical hardware components of the DWR-M960 router.
Explains the LEDs on the front panel for monitoring router status.
Details the meaning of each LED indicator light on the router.
Explains the physical connectors on the rear of the router.
Shows the location of the SIM card slot and wall hanging holes.
Details the side panel, including USB port, Reset, and WPS buttons.
Lists the system requirements for connecting to and using the DWR-M960 router.
Provides step-by-step instructions for physically installing the DWR-M960 router.
Guides through manual TCP/IP configuration for network setup.
Explains how to automatically obtain an IP address for PC network configuration.
Details manual IP address configuration for the PC.
Guides on accessing and starting the router setup via the web interface.
Displays the router's main status and network information.
Shows status information for the Internet connection (IPv4, IPv6, Mobile).
Displays current LAN and Wi-Fi status of the DWR-M960 router.
Lists IP addresses and MAC addresses of connected devices on the network.
Accesses various router configuration settings.
Configures the parameters for the WAN interface for internet connectivity.
Configures IPv4 WAN connection types like DHCP, PPPoE, and Static IP.
Configures IPv6 WAN connection settings including Static, Auto, and 6RD.
Displays the status of all configured WAN connections.
Configures internet connection parameters for 3G or LTE.
Sets up user name, password, APN, and PIN for mobile internet.
Manages SIM card PIN codes, including unlock, modify, and reset.
Manages SMS messages, including Inbox, Outbox, and settings.
Allows setup of different modes for LAN and WLAN interface (NAT, bridging).
Configures wireless network settings.
Configures basic Wi-Fi settings like band, SSID, channel, and mode.
Sets up wireless security, including encryption and password.
Configures Access Control List (ACL) for MAC address filtering.
Scans for available wireless networks.
Configures Wi-Fi Protected Setup (WPS) for easy connection.
Configures local area network settings.
Configures IPv4 LAN settings, including IP address, subnet mask, and DHCP server.
Reserves specific IP addresses for devices using MAC addresses.
Shows information for configuring IPv6.
Shows information for IPv6 RADVD configuration.
Configuration page for Tunnel 6 over 4.
Configures VPN client settings.
Configures PPTP VPN connection parameters.
Configures L2TPv2 VPN connection parameters.
Configures L2TPv3 VPN connection parameters.
Displays the status information for PPTP, L2TPv2, and L2TPv3.
Manages USB storage devices for file sharing.
Displays disk information for connected USB storage.
Manages user accounts for Samba file sharing.
Manages shared folders on connected USB storage.
Details various advanced features of the router.
Configures Quality of Service (QoS) for network traffic prioritization.
Configures firewall settings to protect the network.
Advanced firewall options including DMZ, UPnP, and Telnet access.
Configures Denial-of-Service (DoS) attack prevention.
Configures filtering rules based on IP addresses.
Configures filtering rules based on port numbers.
Configures filtering rules based on MAC addresses.
Configures port forwarding rules to allow external access to internal services.
Blocks or allows access to websites based on URLs.
Manages routing tables for network traffic.
Configures the default gateway route for WAN connections.
Configures static routes for specific network destinations.
Configures dynamic DNS service for remote access.
Manages router settings and operations.
Configures time settings, including NTP server and auto reboot.
Configures the NTP server for time synchronization.
Schedules automatic reboot of the router.
Manages system logs for monitoring and troubleshooting.
Configures system settings, including administrator and backup/restore.
Manages administrator account and password.
Backs up, restores, or resets router settings.
Displays traffic and interface statistics.
Shows user traffic statistics.
Shows packet counters for wireless and Ethernet.
Configures TR069 settings for ACS parameters.
Manages firmware and LTE module upgrades.
Upgrades the router's software firmware.
Upgrades the Mobile module firmware.
