D-Link WDA-1320 - Resolve Network and Internet Connection Issues

To Next Page

To Previous Page

60D-Link WDA-1320 User Manual

Section 5 - Troubleshooting

• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem

with the broadband connection.

• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and

Ethernet cables are ﬁrmly connected.

• Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered for the network.

• In Infrastructure mode, make sure the same Service Set Identiﬁer (SSID) is speciﬁed on the settings for the wireless

clients and access points. The SSID factory default setting for most D-Link products is default. (Double-click on the

WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)

• Check that the Network Connection for the wireless client is conﬁgured properly. Select AP (Infrastructure) when

connecting to an access point. Double-click on the WLAN icon in the taskbar > click on Conﬁguration to change the

settings for the wireless adapter.

4. What should I do when the computer with the WDA-1320 installed is unable to connect to the wireless network and/or the

internet?

Other manuals for D-Link WDA-1320