D-Link WDA-1320 - Troubleshoot Wireless Connection Failures; Troubleshoot Power and Link Light Issues

59D-Link WDA-1320 User Manual
Section 5 - Troubleshooting
• Make sure that the SSID on the WDA-1320 Wireless Desktop Adapter is exactly the same as the SSID on the access
point or wireless router.
• Move the WDA-1320 and the access point or wireless router into the same room and then test the wireless
connection.
• Disable all security settings. (MAC address control, AES).
• Make sure that the access point/router is not set to a different frequency.
• Turn off your access point and the computer with the WDA-1320. Turn on the access point, and then turn on the
computer with the WDA-1320.
• Refresh the WDA-1320 Utility.
2. Why can’t I connect to the access point or the wireless router?
• Check to see if the WDA-1320 Wireless Desktop Adapter is firmly inserted into the PCI slot of your laptop
computer.
3. Why aren’t the Power and Link lights on?