D-Link xStack DES-3526 - Page 111

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
108
show lacp_port
Purpose Used to display current LACP port mode settings.
Syntax
show lacp_port {<portlist>}
Description This command will display the LACP mode settings as they are
currently configured.
Parameters <portlist> - Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display LACP port mode settings:
DES-3526:4#show lacp_port 1-10
Command: show lacp_port 1-10
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DES-3526:4#