DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
26
7
Network Management (SNMP) Commands
The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
The DES-3526 supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can specify which version
of the SNMP you want to use to monitor and control the Switch. The three versions of SNMP vary in the level of security
provided between the management station and the network device. The following table lists the security features of the three
SNMP versions:
SNMP
Version
Authentication Method Description
v1 Community String Community String is used for
authentication − NoAuthNoPriv
v2c Community String Community String is used for
authentication − NoAuthNoPriv
v3 Username Username is used for
authentication − NoAuthNoPriv
v3 MD5 or SHA Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthNoPriv
v3 MD5 DES or SHA DES Authentication is based on the
HMAC-MD5 or HMAC-SHA
algorithms − AuthPriv.
DES 56-bit encryption is added
based on the CBC-DES (DES-56)
standard
To Next Page
Loading...
Need help?
General