DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
25
show port_security
Purpose
Used to display the current port security configuration.
Syntax show port_security {ports <portlist>}
Description
This command is used to display port security information of the
Switch’s ports. The information displayed includes port security,
admin state, maximum number of learning address and lock mode.
Parameters
<portlist> − Specifies a port or range of ports to be viewed.
Restrictions
None.
Example usage:
To display the port security configuration:
DES-3526:4#show port_security ports 1-5
Command: show port_security ports 1-5
Port Admin State Max. Learning Addr. Lock Address Mode
---- ----------- ------------------- -----------------
1 Disabled 1 DeleteOnReset
2 Disabled 1 DeleteOnReset
3 Disabled 1 DeleteOnReset
4 Disabled 1 DeleteOnReset
5 Disabled 1 DeleteOnReset
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To Next Page
Loading...
Need help?
General