DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
127
DES-3526:4# config igmp_snooping multicast_vlan trinity
member_port 1,3 source_port 2 state enable
Command: config igmp_snooping multicast_vlan trinity
member_port 1,3 source_port 2 state enable
Success.
DES-3526:4#
delete igmp_snooping multicast_vlan
Purpose Used to delete a multicast VLAN previously created on the switch.
Syntax
delete igmp_snooping multicast_vlan <vlan_name 32>
Description This command will delete a multicast VLAN previously created on
the switch.
Parameters
<vlan_name 32> − The name of the multicast VLAN to delete from
the switch.
Restrictions You must have administrator privileges.
DES-3526:4#delete igmp_snooping multicast_vlan trinity
Command: delete igmp_snooping multicast_vlan trinity
Success.
DES-3526:4#
show igmp_snooping multicast_vlan
Purpose Used to show the settings for a multicast VLAN previously created
on the switch.
Syntax
show igmp_snooping multicast_vlan {<vlan_name 32>}
Description This command display the settings for a multicast VLAN previously
created on the switch.
Parameters
<vlan_name 32> − The name of a specific multicast VLAN for which
to view settings.
Restrictions You must have administrator privileges.
DES-3526:4#delete igmp_snooping multicast_vlan trinity
Command: delete igmp_snooping multicast_vlan trinity
VID : 2
Member ports : 1,3
Source ports : 2
Status : Enabled
DES-3526:4#
Note: Once a Multicast VLAN has been configured and enabled on the switch, other IGMP Snooping
settings will be overridden and the IGMP Snooping Multicast VLAN will take precedence.
To Next Page
Loading...
