DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
129
Example usage:
To add an IP destination to the DHCP relay table:
DES-3526:4#config dhcp_relay add ipif System 10.58.44.6
Command: config dhcp_relay add ipif System 10.58.44.6
Success.
DES-3526:4#
config dhcp_relay delete ipif
Purpose Used to delete one or all IP destination addresses from the Switch's
DHCP/BOOTP relay table.
Syntax
config dhcp_relay delete ipif <ipif_name 12> <ipaddr>
Description This command is used to delete an IP destination addresses in the
Switch’s DHCP/BOOTP relay table.
Parameters <ipif_name 12> The name of the IP interface that contains the IP address
below.
<ipaddr> The DHCP server IP address.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an IP destination from the DHCP relay table:
DES-3526:4#config dhcp_relay delete ipif System
10.58.44.6
Command: config dhcp_relay delete ipif System 10.58.44.6
Success.
DES-3526:4#
To Next Page
Loading...
