DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
132
DES-3526:4#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status : Enabled
DHCP/BOOTP Hops Count Limit : 2
DHCP/BOOTP Relay Time Threshold : 23
DHCP Relay Agent Information Option 82 State : Enabled
DHCP Relay Agent Information Option 82 Check : Enabled
DHCP Relay Agent Information Option 82 Policy : Replace
Interface Server 1 Server 2 Server 3 Server 4
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3526:4#
Example usage:
To show a single IP destination of the DHCP relay configuration:
DES-3526:4#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface Server 1 Server 2 Server 3 Server 4
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3526:4#
enable dhcp_relay
Purpose Used to enable the DHCP/BOOTP relay function on the switch.
Syntax
enable dhcp_relay
Description This command is used to enable the DHCP/BOOTP relay function on the
switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable DHCP relay:
DES-3526:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-3526:4#
disable dhcp_relay
Purpose Used to disable the DHCP/BOOTP relay function on the switch.
Syntax
disable dhcp_relay
Description This command is used to disable the DHCP/BOOTP relay function on the
switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
To Next Page
Loading...
