DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
11
DES-3526:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3526:4#
config account
Purpose
Used to configure user accounts
Syntax config account <username>
Description
The config account command configures a user account that has
been created using the create account command.
Parameters <username>
Restrictions
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Example usage:
To configure the user password of “dlink” account:
DES-3526:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3526:4#
show account
Purpose Used to display user accounts
Syntax
show account
Description Displays all user accounts created on the Switch. Up to 8 user
accounts can exist at one time.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the accounts that have been created:
To Next Page
Loading...
