D-Link xStack DES-3526 - Page 170

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
167
DES-3526:4#delete iproute default 10.53.13.254
Command: delete iproute default 10.53.13.254
Success.
DES-3526:4#
show iproute
Purpose Used to display the Switch’s current IP routing table.
Syntax
show iproute
Description This command will display the Switch’s current IP routing table.
Parameters None.
Restrictions None.
Example Usage:
To display the contents of the IP routing table:
DES-3526:4#show iproute
Command: show iproute
Routing Table
IP Address/Netmask Gateway Interface Hops Protocol
--------------- --------------- --------------- ---- -----------
0.0.0.0 10.1.1.254 System 1 Default
10.0.0.0/8 10.48.74.122 System 1 Local
Total Entries: 2
DES-3526:4#