DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
177
Example usage:
To configure the user defined method list “Trinity” with authentication methods tacacs, xtacacs and local, in that order.
DES-3526:4#config authen_login method_list_name Trinity method
tacacs xtacacs local
Command: config authen_login method_list_name Trinity method tacacs
xtacacs local
Success.
DES-3526:4#
Example usage:
To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order:
DES-3526:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DES-3526:4#
delete authen_login method_list_name
Purpose Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
delete authen_login method_list_name <string 15>
Description This command is used to delete a list for authentication methods for
user login.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list the user wishes to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the method list name “Trinity”:
DES-3526:4#delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
DES-3526:4#
show authen_login
Purpose Used to display a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
show authen_login [default | method_list_name <string 15> | all]
Description This command is used to show a list of authentication methods for
user login.
Parameters default – Entering this parameter will display the default method list
for users logging on to the Switch.
method_list_name <string 15> - Enter an alphanumeric string of up to
To Next Page
Loading...
