D-Link xStack DES-3526 User Manual

DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
198
config ssh algorithm
Purpose Used to configure the SSH algorithm.
Syntax
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour |
blowfish | cast128 | twofish128 | twofish192 | twofish256 | MD5 | SHA1 |
RSA | DSA] [enable | disable]
Description This command allows you to configure the desired type of SSH algorithm
used for authentication encryption.
Parameters 3DES – This parameter will enable or disable the Triple_Data Encryption
Standard encryption algorithm.
AES128 - This parameter will enable or disable the Advanced Encryption
Standard AES128 encryption algorithm.
AES192 - This parameter will enable or disable the Advanced Encryption
Standard AES192 encryption algorithm.
AES256 - This parameter will enable or disable the Advanced Encryption
Standard AES256 encryption algorithm.
arcfour - This parameter will enable or disable the Arcfour encryption
algorithm.
blowfish - This parameter will enable or disable the Blowfish encryption
algorithm.
cast128 - This parameter will enable or disable the Cast128 encryption
algorithm.
twofish128 - This parameter will enable or disable the twofish128 encryption
algorithm.
twofish192 - This parameter will enable or disable the twofish192 encryption
algorithm.
MD5 - This parameter will enable or disable the MD5 Message Digest
encryption algorithm.
SHA1 - This parameter will enable or disable the Secure Hash Algorithm
encryption.
RSA - This parameter will enable or disable the RSA encryption algorithm.
DSA - This parameter will enable or disable the Digital Signature Algorithm
encryption.
[enable | disable] – This allows the user to enable or disable algorithms
entered in this command, on the Switch.
Restrictions Only administrator-level users can issue this command.
Usage Example:
To configure SSH algorithm:
DES-3526:4# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
Success.
DES-3526:4#
show ssh algorithm
Purpose Used to display the SSH algorithm setting.
Syntax
show ssh algorithm
Description This command will display the current SSH algorithm setting status.
Parameters None.
Restrictions None.

D-Link xStack DES-3526 Specifications

General

Brand	D-Link
Model	xStack DES-3526
Category	Switch
Language	English