EasyManua.ls Logo

D-Link xStack DES-3526 - Page 205

D-Link xStack DES-3526
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
202
disable ssl
Purpose To disable the SSL function on the Switch.
Syntax
disable ssl {ciphersuite {RSA_with_RC4_128_MD5 |
RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA |
RSA_EXPORT_with_RC4_40_MD5}}
Description This command will disable SSL on the Switch and can be used to
disable any one or combination of listed ciphersuites on the Switch.
Parameters ciphersuite - A security string that determines the exact
cryptographic parameters, specific encryption algorithms and key
sizes to be used for an authentication session. The user may choose
any combination of the following:
RSA_with_RC4_128_MD5 – This ciphersuite combines the
RSA key exchange, stream cipher RC4 encryption with 128-bit
keys and the MD5 Hash Algorithm.
RSA_with_3DES_EDE_CBC_SHA - This ciphersuite combines
the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm.
DHE_DSS_with_3DES_EDE_CBC_SHA - This ciphersuite
combines the DSA Diffie Hellman key exchange, CBC Block
Cipher 3DES_EDE encryption and SHA Hash Algorithm.
RSA_EXPORT_with_RC4_40_MD5 - This ciphersuite
combines the RSA Export key exchange, stream cipher RC4
encryption with 40-bit keys.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the SSL status on the Switch:
DES-3526:4#disable ssl
Command: disable ssl
Success.
DES-3526:4#
To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only:
DES-3526:4#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Success.
DES-3526:4#
config ssl cachetimeout timeout
Purpose Used to configure the SSL cache timeout.
Syntax
config ssl cachetimeout timeout <value 60-86400>
Description This command will set the time between a new key exchange
between a client and a host using the SSL function. A new SSL
session is established every time the client and host go through a
key exchange. Specifying a longer timeout will allow the SSL session
to reuse the master key on future connections with that particular
host, therefore speeding up the negotiation process.

Related product manuals