DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
211
DES-3526:4#reconfig member_id 2
Command: reconfig member_id 2
DES-3526:4#
Login:
config sim_group
Purpose Used to add candidates and delete members from the SIM group.
Syntax
config sim [add <candidate_id 1-32> {<password>} | delete
<member_id 1-32>]
Description This command is used to add candidates and delete members from
the SIM group by ID number.
Parameters add <candidate_id> <password> - Use this parameter to change a
candidate switch (CaS) to a member switch (MS) of a SIM group.
The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add a member:
DES-3526:4#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK...
GM Config Success !!!
Success.
DES-3526:4#
To delete a member:
DES-3526:4# config sim delete 1
Command: config sim delete 1
Please wait for ACK...
Success.
DES-3526:4#
config sim
Purpose Used to configure role parameters for the SIM protocol on the
Switch.
Syntax
config sim [{[commander {group_name <groupname 64> |
candidate] | dp_interval <30-90> | hold_time <sec 100-300>}]
Description This command is used to configure parameters of switches of the
SIM.
To Next Page
Loading...
