DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
35
create snmp group
remote SNMP manager.
auth_priv − Specifies that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger will be
encrypted.
read_view – Specifies that the SNMP group being created can
request SNMP messages.
write_view – Specifies that the SNMP group being created has write
privileges.
notify_view − Specifies that the SNMP group being created can
receive SNMP trap messages generated by the Switch’s SNMP
agent.
• <view_name 32> − An alphanumeric string of up to 32
characters that is used to identify the group of MIB objects that a
remote SNMP manager is allowed to access on the Switch.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To create an SNMP group named “sg1:”
DES-3526:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DES-3526:4#
delete snmp group
Purpose
Used to remove an SNMP group from the Switch.
Syntax delete snmp group <groupname 32>
Description
The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DES-3526:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3526:4#
To Next Page
Loading...
