DES-3526 / DES-3526DC Layer 2 Fast Ethernet Switch CLI Reference Manual
83
config multicast port_filtering_mode
Purpose Used to configure the multicast packet filtering mode on a port per
port basis.
Syntax
config multicast port_filtering_mode [<portlist> | all]
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups]
Description This command will configure the multicast packet filtering mode for
specified ports on the Switch.
Parameters <portlist> - Specifies a port or range of ports to view.
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups] – The user may set the filtering mode to
any of these three options
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the multicast filtering mode to forward all groups on ports 1 through 4.
DES-3526:4#config multicast port_filtering_mode 1-4
forward_all_groups
Command: config multicast port_filtering_mode 1-4
forward_all_groups
Success.
DES-3526:4#
show multicast port_filtering_mode
Purpose Used to show the multicast packet filtering mode on a port per port
basis.
Syntax
show multicast port_filtering_mode {<portlist>}
Description This command will display the current multicast packet filtering
mode for specified ports on the Switch.
Parameters <portlist> - Specifies a port or range of ports to view.
Restrictions None.
Example usage:
To view the multicast port filtering mode for all ports:
To Next Page
Loading...
