Dacia SANDERO 2024 - Page 109

TRIP COMPUTER
2
– Overspeed sound alert;
– Lane departure prevention;
– Driver vigilance warning.
Depending on the function, select:
– "ON" or "OFF" to activate or deacti-
vate it.
Please refer to the multimedia instruc-
tions for further information.
For safety reasons, carry
out any adjustments
while the vehicle is sta-
tionary.
Vehicles not fitted with a multime-
dia screen
Accessing the settings menu on
display 2
With the vehicle stopped, press the
switch 3 as many times as required to
reach the "Settings" tab. Press control
4 or 5 repeatedly to access the "Vehi-
cle settings" menu, then confirm by
pressing 6 "OK".
Adjusting the settings
Navigate using control 4 or 5 to select
the function to be modified and press
control 6 "OK" to confirm (display may
vary according to vehicle equipment
and country):
a) "DASHBOARD":
– Language;
– Unit.
b) "PARKING ASSIST":
– Beep volume.
c) "DRIVING ASSIST":
– Lane departure warning sound vol-
ume;
– Blind spot;
– Active braking;
– Speed warning;
– Lane departure warning sensitivity;
– Lane Keep Assist sensitivity;
– Lane departure warning vibration;
d) "ACCESS":
– Unlockingthedriver’sdoor;
– Lock doors during driving;
– Opening/closing in "hands-free
mode";
– Remote locking/approach unlocking;
– Remote locking sound;
– Silent mode;
– Automatic locking.
e) "WIPERS":
– Automatic front wiping;
– Wiping in reverse;
f) "RESET":
function activated
function deactivated
g) "MY SAFETY PERSO":
– Speed warning;
– Driver vigilance warning;
– Overspeed sound alert;
– Lane departure warning.
Once a line has been selected, press
the switch 6 "OK" to modify the func-
tion.
If you select either "PARKING ASSIST"
then "VOLUME" or "DASHBOARD"
then "LANGUAGE", you will have to
make a further selection (Park Assist
sound volume or instrument panel lan-
guage). In this case, make your selec-
tion and confirm it by pressing the
switch 6 "OK", the selected value is
shown by a in front of the line.
Getting to know your vehicle - 107