Dacor DOC30M977DS/DA - Information codes; OVEN

Information codes
OVEN
Displayed code Possible cause Solution
C-d0
Occurs if control key is short for 1 min. Clean screen; ensure no water is on/
around it. Turn off oven and retry. If
problem persists, contact a Dacor
service center.
C-d1
Occurs if door lock is mispositioned.
Press OFF, and then restart the oven.
If the problem persists, disconn
ect
all power to the oven for at least 30
seconds and then reconnect the
power. If this does not solve the
problem, call for service.
C-F0
Occurs if communication between
Main and Sub PBA is interrupted.
C-F2
Occurs if communication between
Main and Touch is interrupted.
C-10
The cooking sensor is open when the
microwave is operating.
The cooking sensor is short when the
microwave is operating.
C-20
The oven sensor is open when the
oven is operating.
The oven sensor is short when the
oven is operating.
C-21
This code occurs if the internal
temperature rises abnormally high.
C-23
The temp probe sensor is short
when the oven is operating.
C-30
The PCB sensor is open when the
oven is operating.
The PCB sensor is short when the
oven is operating.
C-31
This code occurs if the PCB
temperature rises abnormally high.
Call for service.
C-70
The steam sensor is open when the
oven is operating.
Press OFF, and then restart the oven. If
the problem presists, disconnect all
power to the oven for at least 30
seconds and then reconnect the
power. If does not solve the problem,
call for service.
The steam sensor is short when the
oven is operating.
C-72
There are drain system-related
problems.
C-A2
The cooling motor is operating
abnormally.
Call for service.
94
English