DAD AX32 - Electrical and Environmental Specifications; Electrical and Mechanical Specifications; Environmental Specifications

User Manual AX32
Doc no. AX32-8002-A-4 Rev. date 140124 Page 28 of 31
Electrical Specifications
Power consumption 90 VA max.
Input voltage 90 – 260 VAC
100 – 240 VAC Nominal, 47 - 63 Hz
Mains fuse, mounted in IEC connector 1 A, T1AH/250V
Safety compliance EN 60950-1:2006
Power supply cord must be min. light sheathed flexible cord according to IEC60227 (designation 60227 IEC
52) and include a protective earth conductor having a green-and-yellow insulation. Cross-sectional areas
min. 3x0.75mm2”
Mains line plug type Correct type acc. to standard
110-125V UL817 and CSA C22.2 no 42
220-230V CEE 7 page VII, SR section 107-2-D1/IEC 83
page C4.
240V BS 1363 of 1984.Specification for 13A fused
plugs and switched and unswitched socket
outlets
Mechanical specifications
Chassis standard 19”, 2 RU
Chassis depth, without connectors mounted 35.0 cm / 13.8”
Chassis body width 43.5 cm / 17.2”
Weight, not including I/O cards 5 kg / 11 lbs.
Chassis air flow from front to rear
Environmental specifications.
Operating Temperature 0 – 45 ºC / 32 - 113ºF
Humidity
EMC compliance EN 55103-1, part 1: emission
EN 55103-2, part 2: Immunity
FCC 47 CFR part 15 (B): emission