6-3
ENGINE REMOVAL
Remove the nut from the engine hanger.
Lifting the frame end lightly, remove the flange bolt
securing engine hanger and seperate the frame from the
engine.
ENGINE INSTALLATION
Install in the reverse order of removal.
NOTE
Take precautions not to damage wiring and cable.
Take precautions not to damage the threaded part of
bolts.
Arrange the cable, tubes and wiring in the right
positions.
TORQUE VALUE
ENGINE HANGER NUT : 4.5 f m
Check the following after the engine is installed.
-Engine oil
-Electric systems.
To Next Page
Loading...
Need help?
General
