Daewoo Bus BS106 - High Beam Headlamps; Passing; Subsidiary Brake Switch

●
High Beam Headlamps :
Pulling down the lever while
headlamps are activated (light switch
in 2nd mode) turns on the high beam
headlamps and also the high beam
activation indicator lamp in the
instrument panel.
●
Passing :
Independent of the light switch,
pulling up the lever turns on the high
beam headlamps, and releasing it
returns the lever to its original
position and turns of the headlamps.
Pulling the lever spplies the subsidiary
brake and turns on the indicator lamp
in the instrument panel.
Refer to page 4-19 for Subsidiary
break.
3 - 37
DEVICE CONTROL TIPS
Subsidiary Brake Switch
OM-B409E OM-B112
REFERENCE
Operating the light switch to the
2nd mode turns on the low beam
activation inducator lamp in the
instrument panel.
Fog lamps and destination lamps
can be operated separately in 1st
or higher modes.
Parking lamps can be activation
separately from the light switch
using another switch.
·
·
·