Daewoo Bus BS106 - Adjusting the Idle Rotation Value; Setting the New Idle Rotation Value

Adjusting the idle rotation value
●
DL06, DL08, DV11 Engine
While holding the brake pedal, press
the save/return switch for 1 second,
and then push the idle control switch
upwards to increase engine rotation
value and downwards to decrease
engine rotation value.
●
ISM Engine
Push the idle control switch upwards to
increase engine rotation value and
downwards to decrease engine
rotation value.
Setting the new idle rotation value
Press the Save/Return switch changing
the rotation value.
When the value is set by pressing the
Save/Return switch, the lastly set value
is maintained even after the following
srating of the engine.
When the engine si turned off without
pressing the Save/ Return switch, it
returns to the initial value.
You must repeat the idle rotation value
changing procedures by pressing the
Save/ Return switch to change the
engine rotation value when wanting to
return to the initial value after having
set a new idle rotation value.
●
Releasing the adjustment of idle
rotation value.
Release the brake pedal or press the
Save/ Return switch.
3 - 42
DEVICE CONTROL TIPS
OM-S018E
TYPE D
CAUTION
Always operate the engine speed
actuator while the engine is running
and adjust it in the idle state.
WARNING
Do not operate the speed actuator
while driving as it change the speed
which is dangerous.