Daewoo DH-6100P - Recording from an External Input; Recording from External Components

RECORDING
45
You can record from an external component, such
as a camcorder, VCR or Digital Camera, connected
to any of the HDD/DVD Recorder’s external inputs.
1 Make sure the component you want to record
from is connected properly to the HDD/DVD
Recorder; see pages 15~17.
2 Use [PR+/–] or [INPUT] to select the external input
to record from.
3 Load a recordable disc if you are recording onto
a DVD. And then select HDD or DVD to record.
4 Set the desired Recording mode by pressing [REC
SPEED] repeatedly.
Available disc (or HDD) space will be displayed
by selecting recording mode.
5 Press [REC ( ● )] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc (or HDD) is full.
To record for a fixed length of time, see ‘One
Touch Record‘ on page 41.
6 Press [STOP ( ■ )] to stop recording.
Recording from External Components
• If your source is copy-protected, you will not be
able to record it using the HDD/DVD Recorder.
See ‘Copyright Notice‘ on page 8 for more
details.
Recording from an External Input
Recording from an External Input
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘ ` 45 mac001 1200DPI 100LPI