• N.B.: An S-Video input into AV3 will take precedence
over the normal yellow video lead so no need to
utilise this if S-Video lead is used but you must
still use the right and left audio leads to produce
sound.
AV1 AV2
AV(S)3
AV
29
NOTES:
1) If your local cable company re-transmits digital broadcasts,
you may watch normal broadcasts and digital broadcasts
simultaneously. For detailed information, refer to your local
cable company.
2) A/V OUT OF SCART TERMINAL will provide with TV signal
output of the selected channel.
Input Select
• Select [AV 1(Scart), AV 2(Scart) or
AV3(S-Video)] by pressing the [AV]
button of the remote control or the
“INPUT SELECT” in keypad of the PDP unit.
• Each time you press the [AV] button,
different input modes appear.
The sequence is as follows:
3
Select the Desired Program and Function
* Select the desired program and function
by using the remote control of the Cable
Broadcasting Receiver.
4
To Next Page
Loading...
Need help?
General