To Next PageTo Next PageWhat to do if my Daewoo DWD-FT1083 displays E9 SENSOR PRESSURE ERROR?
If your Daewoo Washer displays an E9 SENSOR PRESSURE ERROR, change the water level sensor, as it is likely an inferior product.
How to troubleshoot H2 THERMIST WASH ERROR on Daewoo Washer?
To troubleshoot the H2 THERMIST WASH ERROR on your Daewoo Washer: * Change the thermistor wash if it is an inferior product or broke down. * Check the connector of the thermistor wash to ensure it is connected normally.
How to resolve H4 THERMIST WASH OVERHEAT ERROR on Daewoo DWD-FT1083 Washer?
To resolve the H4 THERMIST WASH OVERHEAT ERROR on your Daewoo Washer: * Check the water level to ensure the heater isn't working without water in the tub. * Change the thermistor wash if it is an inferior product or broke down.
Why is my Daewoo DWD-FT1083 Washer making a vibrating noise?
If your Daewoo Washer is making a vibrating noise, first check if all the transit bolts and packing have been removed from the back of the washer. If not, refer to the installation guide to remove them. Also, ensure all the feet are resting firmly on the ground. If the noise persists, the wash load may be unevenly distributed; stop the washer and rearrange the load.
Why is my Daewoo Washer not draining or draining slowly?
If your Daewoo Washer is not draining water properly, start by cleaning and straightening the drain hose to ensure it's free from kinks or clogs. Also, check and clean the drain filter.
How to fix a Daewoo Washer that will not spin?
If your Daewoo Washer won't spin, make sure the door is firmly shut. Close the door and press the Start/Hold button; it may take a moment for the washer to begin spinning. The door must lock before the spin cycle can start.
What to do if the door of my Daewoo Washer does not open?
If your Daewoo Washer door won't open, once started, the door cannot be opened for safety reasons. Wait two minutes before attempting to open the door to allow the electrical locking mechanism time to release.
Why is my Daewoo DWD-FT1083 Washer not starting?
Your Daewoo Washer might not start due to several reasons: * The power cord may not be properly plugged in. Ensure the plug fits tightly in the wall outlet. * A house fuse may be blown, the circuit breaker tripped, or there is a power outage. Reset the circuit breaker, but do not increase the fuse capacity. If a circuit overload is the problem, have it corrected by a qualified electrician. * The water supply tap might not be turned on. Make sure to turn on the water supply tap.
How to fix a Daewoo Washer that won't drain?
If your Daewoo Washer isn't draining, it could be due to: * A kinked or clogged drain hose. Clean and straighten the drain hose. * A clogged drain filter. Clean the drain filter.
What to do if Daewoo Washer door does not open?
Wait two minutes before opening the door to allow the electric locking mechanism time to release.
Explains the purpose of transit bolts and how to remove them before operation.
Specifies requirements for washer placement, level floor, and power outlet.
Details how to connect the water inlet hose for ordinary and screw-shaped taps.
Details correct placement and securing methods for the drain hose.
Details the step-by-step progress times for various wash programs like Cotton, Synthetic, and Wool.
Lists error codes (IE, OE, UE, etc.) with their causes and solutions.
General| Washing Capacity | 8 kg |
|---|---|
| Spin Speed | 1000 RPM |
| Energy Rating | A+++ |
| Noise Level (Washing) | 58 dB |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
| Weight | 65 kg |
| Color | White |
| Type | Front Load |
| Programs | Cotton, Quick Wash, Rinse, Wool |
